JL-2000 Energy Storage Power Supply Specification

Product Description

JL-2000 energy storage power supply is a high-end fashion power supply product of our company, using aluminum alloy shell, light, portable, fashionable and generous appearance, using power lithium iron phosphate battery total capacity 1536WH(3.2V/480000mAh), advanced manufacturing technology, power output energy, provide AC output, DC output two different voltage mode output, meet the user electronic product charging, and other aspects of electricity demand.This product can be used as UPS power supply and outdoor portable emergency backup power supply.

AC: 220V (110V) AC output

DC output：PD65W*2，QC3.0*2，5V/2.1A*2,One 12V cigarette port .

With a high-brightness LED light (5W).

Display screen displays：percentage of electricity，input display: power and time,output display: power and time，Also with a UPS uninterrupted display.

There are the following two inputs: mains charging (built-in charger) and solar charging.

The output is suitable for a variety of different devices such as drones, portable ventilators, medical devices, mobile phones, tablets, laptops, desktop computers, small printers, various lamps, small fish tanks, photographic equipment, electric scooters etc.Very convenient for users to travel at home, outdoor work, camping picnic, mountaineering and exploration, etc.

Electrical Parameters

Functional Introduction and Use Description

Panel Description

l When opening the AC or DC switch,first you must turn on the power switch to be valid.（Long press for 3 seconds）

l When using DC output function, press the corresponding DC button to confirm the display DC and DC can be used（Long press for 3 seconds）.The display displays the output power and use time in real time.Turn off the button when not used, to avoid power self-consumption（Long press for 3 seconds）.The LCD display shows the power surplus, 0~100%.

l When using the AC output function, please press the corresponding AC button to confirm the display AC of the display screen, when the communication can be used, and the display screen displays the output power and use time in real time（Long press for 3 seconds）.Turn off the button when not used, to avoid power self-consumption（Long press for 3 seconds）.The LCD display shows the power surplus, 0~100%.If the power is insufficient, there will be an alarm prompt. Please charge in time for continuing to use.

l When using the LED light, please turn the corresponding button on.

l When using the UPS function, open the AC, to confirm that the output is normal, and  then insert the AC power line into the AC socket. The display will display the UPS characters, indicating normal use.

l When using solar energy to charge the product, within 60V/240W. When the solar panel is connected to charging, the corresponding charging time and power will be displayed on the display screen. If the solar charging icon is not bright, check whether the solar panel is reversed or the solar panel faces the sun (stay at 30 degree angle).

l When the product is charged by the mains , the corresponding charging time and power will be displayed on the display screen during the charging process ( 3 hours can charge more than 80%)

l The output power is reduced upon overload when the machine goes into protection.Disconnect load automatically.When the output load is short circuit, the machine enters the protection and disconnects the load to recover automatically.

LCD Display Description

l When the host switch is turned on,the display will light and the battery character C displays the current battery amount of power.The amount of power is shown in five grids. The D shows the current power percentage of the battery.

l After opening the DC switch on the panel, the DC / OUTPUT character in G is lit. When using the DC function, the J displays the current power used, the unit is W(Watt), the K shows the usage time, the unit is Min( minute).

l After opening the AC switch on the panel, the E AC/ PUTPUT character is lit. When using the AC function,the J shows the current power used, and the unit is W(Watt), the K shows the usage time, the unit is Min( minute).

l When using DC and AC functions at the same time, the J shows the total use power, the unit is W(Watt). The K shows the total usage time, unit is Min( minute).

l When charging the host with solar charging function, the display character A is lit. The H Displays the charging power, the I display the battery for a minute, unit is Min( minute).

l When the mains is charging the battery, the character B is lit and the character F is also lit. Indicates that the battery is charged, and the internal MCU detects whether the UPS function is normal, as the normal UPS / POWER character is lit. The H Displays the charging power, the I shows the time when the battery is fully charged, and the unit is Min( minute).

Frequently Asked Questions

1. The equipment power cannot be used within the rated output power range of the product?

a. The power of the product is less than 20%, and the power needs to be supplemented.

b. Some equipment start is greater than the peak power of the product, or the standard power of the equipment is greater than the actual power of the product, it is recommended to choose a higher power product.

--------------------------------------------------------------------------------

2. Why is there a sound when using it?

The product adopts an air-cooled system, and the built-in fan can better help the product dissipate heat. It is normal for a slight noise during use.

--------------------------------------------------------------------------------

3. Is it normal for the charger to heat up during charging?

It is normal for the charger to heat up during charging, so there is no need to worry.

--------------------------------------------------------------------------------

4. Why does the use of high-power electrical appliances cause the battery to automatically shut down?

 When the output power required by the electrical appliance exceeds the power range of the battery itself, it will cause the battery itself to enter the circuit protection, lock the circuit board, let it stand for 5 minutes and reconnect the charger to activate and restart.

Packing  List

Warning and Precautions

When using this product, you should always follow the following notes: 

l When the product is not in use, put the product is placed in a ventilated place to avoid rain and wet. It is recommended to charge every 3 months.

l Try to charge the product in a well-ventilated place. When the product is not used, remove the power plug out the product outlet.

l It is forbidden to expose the product to the fire or higher than 80℃, which can lead to a fire explosion and other accidents. 

l It is forbidden to use or place the product for a long time in high   temperatures (in direct sunlight or in a very hot car), otherwise it may cause internal battery overheating, fire or function failure, and decrease in life. 

l It is forbidden to disassemble the product. After the product is disassemble, it may lead to unpredictable risks such as fire, explosion or electric shock.

l It is forbidden to use of damaged wire or plug, or damaged output cable to use the product. There is a risk of electric shock.