ES-750 Energy Storage Power Supply Specifications

Product description

ES-750 backup power supply for our company a high-end fashion power products, using aluminum alloy shell material, lightweight portable, stylish appearance, the core uses power lithium batteries, advanced manufacturing technology, power output energy, Provide AC output, DC output two different voltage mode output, to meet the user's electronic products charging, AC power, and field car ignition and other aspects of the demand. This product can be used not only as EPS power supply, but also as outdoor emergency power supply.

This product has many power lithium-ion batteries built in, the total capacity of 12V55AH/610.5Wh provides continuous power supply, at the same time, as an indoor and outdoor standby emergency power supply, it also has a wide range of applications. 220V/12V/5V AC / DC output, suitable for a variety of different equipment, Mobile phones, tablets, notebook computers, small printers, various lamps and lanterns, small fish tank heaters, photographic equipment, electric balanced unicycle charging, medical equipment, etc., are extremely convenient for home travel, outdoor work, camping and picnics, etc. A mountaineering expedition, etc

Electrical parameters 

Online switching usage

In the case of normal electricity, from the power supply to the equipment, at the same time charge the product.

During a sudden power outage, the internal lithium battery automatically switches the cost of the product to power the equipment.

In the face of sudden power outages, computers and so on can not be shut down to continue to work!

Product advantages:

1.The core adopts the power lithium battery and the advanced manufacturing assembly process to ensure the product quality is stable.

2. Use charger built-in mode, greatly improve product portability and practicability.

3. It has the function of online switching.

4. With 12 V car ignition start function.

5. The shell uses aluminum alloy material, appearance fashion generous.

Introduction to functions and instructions for use

When using the DC output function, please turn on the corresponding DC switch, the DC output indicator lights up, at this time can use DC 12V and 5V output. When not applicable, turn off the switch so as not to cause power consumption. The LED display displays the remaining power supply, 0-100%. When the electricity is insufficient, please charge the product in time for further use. When using LED lighting, please turn on the corresponding switch.

 When using the auto emergency start function, first insert the blue joint of the standard alligator clamp end of the power supply into the front panel of the power supply, then open the front cover of the vehicle, and find the positive and negative poles of the car battery. Then the red and black crocodile pliers are clamped in the vehicle battery positive and negative (red pliers, black pliers negative), start the car

Note: small displacement vehicles under 2.5L and below can be started directly. For vehicles with a displacement of 2.5L or more, please charge the battery for more than 10 minutes with this power supply, and then start the fire operation.

Back panel description

As shown in figure, when using, insert AC input power cable into AC socket and plug in AC input interface at the other end. Then the load power cord is connected to the AC universal socket of the product itself, and the AC output switch can be used normally. When there is no power failure, the AC power supply for the load, at the same time, also charge the product, charging indicator lights show red, full of green display; When a power outage occurs, it automatically switches to a battery inside the product to power the load. 

Please note: when accessing the load, the load operation power should not exceed the maximum output power of the machine itself. The maximum output power of the machine itself is 500W. If the load running power exceeds 500W, the power can not be output in the protective state. Remove the excess load, restart the power can be used normally. When the super power is used, it will cause the fuse of the machine to fuse and replace an 8 A fuse for normal use.

Please turn off the switches when you take them out for outdoor use.Please turn them on when you need them. Otherwise, the battery will be consumed automatically. 

Solar energy and on-board charging description: as shown in the solar interface, the solar panel specification is 18 V 30 W 40 W. When connecting the solar panel, note that the positive and negative electrodes cannot be connected, and the positive and negative electrodes (left positive and right negative) should be corresponding to the interface, otherwise, they cannot be charged. When the solar panels charge normally, the charge indicator shows red and green when full. Vehicle cigarette lighter output voltage should be 12 V, do not use 24 V to charge the power supply.

Packing list

 Precautions

1. This product contains lithium battery, please stay away from the source of fire, if you do not use please do special treatment, do not arbitrarily discard.

2. Do not use this product in a humid environment or in water.Pay attention to moisture protection and use it in a ventilated and dry environment.

3. When using the product, please take it lightly, do not drop, beat or disassemble by force.

4. When abnormal phenomena such as smoke or fire are found in use, please stop using the machine immediately and take relevant fire extinguishing measures to avoid explosion.

5. When using this product, please turn it on first.Turn on the corresponding switch LED indicator light up, confirm the output, and then use.

6. When using this product for the first time, please recharge and use it after all the electricity is put out.

7. When this product is unused, please take it out every three months or so to ensure the battery life.